An N75 and Talks Question

[Stephen Giggar]

Blessings

No the Talks proram will not speak the name/Number of the incoming call when the flip of the N75 is 
closed. I would suggest that you turn on the Say Name function for the profile that you are using. 
This is probably under the following. Menu, Settings and then profiles. Select the current profile 
that you are using and arrow down to customize and press select. Then arrow down to Say Name and if 
it says OFF, press Select to turn it on. After that back out of the profiles to the main screen. Now 
if the phone rings and the person is in your contact list; The phone will speak the name of the 
person.

Signed: Stephen Giggar
sgiggar at sbcglobal.net
Skype: dr-phone.

----- Original Message ----- 
From: "Brian Hansen" <bc.hansen23 at mchsi.com>
To: "Blind Phones Mailing List" <blindphones at mosenexplosion.com>
Sent: Tuesday, March 18, 2008 11:51 PM
Subject: An N75 and Talks Question


> I've downloaded and installed the demo of Talks on my N75, and I've got one
> question.  Is there a way to get Talks to announce the caller ID information
> for an incoming call when the phone is closed?  I can get Talks to announce
> the info when the phone is open and it rings, but not when it's closed.  I
> tried the buttons on top, but the only thing that happens is that the ring
> is silenced and the person is sent directly to voice mail.  I know the phone
> can talk when the unit is closed, because when I hit the power button, I
> have to hit the left soft key to shut things down, and when I hit the left
> button on the face of the phone, the phone beeps and then goes off.  Any
> help would be greatly appreciated.
>
> Blessings,
>
> Brian
>
> You received this message because you subscribed to the Accessible Phones Discussion List.
>
> If you don't want to receive messages from this list anymore, just send a blank e-mail to:
> blindphones-unsubscribe at mosenexplosion.com